Mikuni TM36 -68Flat Slide Carburettor SR500, TT500, XT500, WITHOUT Rejetting Kit

Product Description

Mikuni TM36 Flat Slide Carburettor, WITHOUT Rejetting Kit SR500 TT500 XT500

Description

The Mikuni TM36-68  is supplied with the following factory jetting installed:

Pilot jet 12.5 (VM28/486),  Needle 9DZH6-50,  Needle Jet P-8 (568 Series),  Main Jet 130 (N100.604),  Air Jet 1.0

Mikuni TM36-68 Dimension (See Picture) A= 42mm, B= 100mm, C= 176mm, D= 54mm. Total width=75mm

Going fast has never been so easy.  These carburetors can be adapted to a number of different applications from single to multi-cylinder engines, giving better throttle response, improved acceleration, increased horsepower and torque.  In a number of instances Dyno tests have shown improvements of up to 25%  when fitted to same size CV carburettored engines.

• Equipment TM36-68: Carburetor with accelerator pump, gas slider with compulsive actuation (opening and closing), cold-start device (choke) and low pressure port (e.g.for low pressure fuel petcocks, where applicable)
• Fits SR500 and XT500 without modifications to the air filter box; in SRX600 airbox joints must be extended (supplied with Kit 33147)
• Mounting of K&N racing air filters possible (air filter box not applicable)
• For rejetting Kit see item K33142