Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare
Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view Motogadget | sku: K62005-16 Mounting Bracket for Motogadget 'Motoscope Tiny' Speedometer (instead of main switch at upper SR-yoke, suitable for speedo 40354 d.o.p. 2016 and up MSRP: Was: Now: AUD $35.95 inc. GST MSRP: Now: AUD $32.68 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K92050 Oil Line Kit Twin Feed 'RaceLine' Braided Stainless SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K92101 Oil Line Kit Twin Feed Rubber/textile line SR400 SR500 TT500 XT500 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K62002 Rear Fender JvB-moto GRP unpainted/undrilled, incl. Tail Light MSRP: Was: Now: AUD $349.00 inc. GST MSRP: Now: AUD $317.27 ex. GST Add to Cart Compare Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view Motogadget | sku: K40354 Speedometer Motogadget 'Motoscope Tiny', 49mm dia, Black Aluminium MSRP: Was: Now: AUD $389.00 inc. GST MSRP: Now: AUD $353.64 ex. GST Add to Cart Compare Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view Motogadget | sku: K62005 Speedometer Mounting Bracket for Motogadget 'Motoscope Tiny' MSRP: Was: Now: AUD $32.95 inc. GST MSRP: Now: AUD $29.95 ex. GST Add to Cart Compare Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K30612 Speedometer Spacer, Aluminium (Replaces OEM Speedometer Drive) MSRP: Was: Now: AUD $33.70 inc. GST MSRP: Now: AUD $30.64 ex. GST Add to Cart Compare Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: G23207 Swing Arm SR400 SR500 Silver Alloy MSRP: Was: Now: AUD $495.00 inc. GST MSRP: Now: AUD $450.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K41305 Wiring Loom Extension Main Switch (DIY) (1.5m 7-pole wire, 2/4-pole connector housing, includes Japanese bullet connector, cable ties) MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view Mikuni | sku: K32288 Mikuni VM36 Roundslide Carburetor Mikuni VM36 Roundslide Carburetor The Mikuni VM36-4 is supplied with the following factory jetting installed: Pilot jet 35 (VM22/210), Needle 6FJ6, Needle Jet Q-5 (159 Series), Main Jet 310 (4/042), Air Jet 2... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view Mikuni | sku: VM38-9 Mikuni VM38 Roundslide Carburetor Mikuni VM38 Roundslide Carburetor The Mikuni VM38-9 is supplied with the following factory jetting installed: Pilot jet 30 (VM22/210), Needle 6DP1, Needle Jet Q-2 (166 Series), Main Jet 330 (4/042), Air Jet 0... MSRP: Was: Now: AUD $179.00 inc. GST MSRP: Now: AUD $162.73 ex. GST Temporarily Out of stock Compare Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view K&N | sku: K91617 Air Filter Pod K&N Mikuni TM36 Flatslide SR500 TT500 XT500 Air Filter Pod Mikuni K&N TM36 Flatslide SR500 TT500 XT500 (Length=127, Diameter=89mm), 55-59mm Connection Application: Mikuni TM36, TM40 Flat Slide Carburettor 55mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Add to Cart Compare Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view K&N | sku: K91520 Air Filter Pod K&N Mikuni VM36 Roundslide SR400 SR500 TT500 XT500 Air Filter Pod Mikuni K&N VM36 Roundslide SR400 SR500 TT500 XT500 (Length 127mm/Diameter 96mm), Flange 60-64mm Application: Mikuni VM36 Round Slide Carburettor 62mm MSRP: Was: Now: AUD $99.95 inc. GST MSRP: Now: AUD $90.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K33070 Battery Eliminator 12Volt Application: fits SR400 SR500, XT600K'90-, TT600R/S (for XT500 12V, XT550, SRX600, XT600-'89 see more Information below) Battery Eliminator 12Volt Application: fits SR400, SR500, XT600K'90->, TT600R/S (For XT500, XT550, SRX600, XT600<-'89 see more information below) More Information HERE MSRP: Was: Now: AUD $34.95 inc. GST MSRP: Now: AUD $31.77 ex. GST Add to Cart Compare Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K41138 Brake Disc OEM-Style Replica, Slotted, Front LH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Left Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Add to Cart Compare Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K41139 Brake Disc OEM-Style Replica, Slotted, Front RH, 1 Piece Brake Disc OEM-Style Replica, SR500 5mm thick, Slotted, Front Right Hand, 1 Piece Replica brake disc, visually (and technically) hardly distinguishable from the original MSRP: Was: Now: AUD $269.00 inc. GST MSRP: Now: AUD $244.55 ex. GST Temporarily Out of stock Compare Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view EBC | sku: K40159 Brake Disc ProLite-Type, Floating, Front, Left Hand Brake Disc ProLite-Type, Floating, Front, Left Hand Application: SR500 '78> Excellent brake performance and durability, corrosion preventive coated Diameter like OEM, front discs partially floating Contour - type enables better self-cleaning and... MSRP: Was: Now: AUD $289.00 inc. GST MSRP: Now: AUD $262.73 ex. GST Add to Cart Compare Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K40099 Brake Master Cylinder (front) 1/2" with Brake Light Switch, Stainless Steel Banjo Front Brake Master Cylinder 1/2" with Black Aluminium Lever, Brake Light Switch, Stainless Steel Banjo Bolt, if Clamp with Mirror thread is required use optional clamp K40104) Complete master cylinder with lever, brake light switch, banjo bolt and... MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K91573 Clamp 19-22mm (Especially for Item 22703) Hose Clamp 19-22mm Wire Type (Especially for Item 22703) MSRP: Was: Now: AUD $4.95 inc. GST MSRP: Now: AUD $4.50 ex. GST Add to Cart Compare Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view K&N | sku: K91559 Crankcase Vent Filter K&N (62-1120) with 19mm Steel Base K&N Crankcase Vent Filter (62-1120) with 19mm Steel Base Required in the assembly of racing air filters, because along with the air filter box usually also the crankcase ventilation is dropped Optimizes combustion; mixture is no longer... MSRP: Was: Now: AUD $66.50 inc. GST MSRP: Now: AUD $60.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K22703 Crankcase Vent Hose Spiral PVC ID 19mm Crankcase Vent Hose Spiral PVC, ID 19mm, 1mtr, Black, with Incorporated internal Bend Relief. Ideal if the air filter box has been removed Thick-walled PVC hose with bend relief Ø 19mm (inside), price per... MSRP: Was: Now: AUD $9.95 inc. GST MSRP: Now: AUD $9.05 ex. GST Add to Cart Compare Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K62001 D-Track Front Fender incl. Aluminium Mounting Brackets D-Track Front Fender JvB-moto incl. Aluminium Mounting Brackets (ABS unpainted, mounting points drilled) as used in our B-Track and D-Track bike builds. Aesthetic and clear design defining the look of this JvB front fender With a... MSRP: Was: Now: AUD $229.00 inc. GST MSRP: Now: AUD $208.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K41782 Electrical Component Mounting Panel for Under Seat Alloy Mounting Panel for Under-Seat Mounting of Electrical Components Required if battery and airbox are removed Race proven. This aluminium bracket offers space for the CDI-unit and regulator and other electrical components if needed Mounting... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K30584 Footpegs Stainless Steel (Left & Right), for 8mm Bolt (1 Pair) Footpegs Stainless Steel Heavy Duty (Left & Right), for 8mm Bolt (1 Pair) Plain and stable, dulled stainless steel, fits all XT250 XT550 TT600 & XT600/E/K/Z (with 8mm hole) MSRP: Was: Now: AUD $119.00 inc. GST MSRP: Now: AUD $108.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K29133 Fork Boots Scrambler 185mm/58mm, black, 1 Pair Scrambler Fork Boots, 185mm/58mm, black, 1 Pair The bellows for the SR500 Specially developed by us for the original fork, absolutely perfect fit and with the right number of grooves there are no wrinkles or looks that are annoying,... MSRP: Was: Now: AUD $39.95 inc. GST MSRP: Now: AUD $36.32 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: G29123 Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat) Fork Boots SR400 SR500 "D-Track" Fatty 1 Pair (Short and Fat, 7 Ribs, includes Retainer for Lower Yoke) MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
SALE Quick view KEDO | sku: K30351 Fork Top Nut Cover Set polished Aluminium incl. O-Rings SR400, SR500/T Fork Top Nut Cover Set (Set of 2), polished Aluminium includes O-Rings A highlight for every SR High gloss polished, domed aluminium caps which are replacing the disdainful standard rubber caps Complete set of 2 Application: SR400, SR500/T MSRP: AUD $39.95 Was: AUD $39.95 Now: AUD $29.95 inc. GST MSRP: AUD $36.32 Was: AUD $36.32 Now: AUD $27.23 ex. GST Add to Cart Compare
Quick view sku: K22227 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 Fuel Tank Cap with Lock for Daytona Steel Tank Item K22226 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K22226 Fuel Tank Daytona Sportster approx. 8L (Raw Mild Steel) SR400 SR500 This item qualifies for FREE SHIPPING within Australia and New Zealand ****Special Order Item please allow 2-3 week Procurement**** Fuel Tank Daytona approx. 8L (Raw Mild Steel) Sportster-Style steel fuel tank. Used in combination with... MSRP: Was: Now: AUD $699.00 inc. GST MSRP: Now: AUD $635.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K62004 Fuel Tank Extension D-Track GRP unpainted (pr) Fuel Tank Extension for K22226 D-Track GRP unpainted (pr) These GRP covers (unpainted, sold as pair) make the Daytona fuel tank 22226 fit perfectly Currently not available, sorry!We are doing our best to get supplies. MSRP: Was: Now: AUD $299.00 inc. GST MSRP: Now: AUD $271.82 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K50692 Fuel Tap Adaptor kit SR500 (OEM Flange to M14x1) Fuel Tap Adaptor Kit SR500 (OEM Flange to M14x1) Use K29251 or K50597 Tap Application: SR400 SR500 MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K21016HD Gear Lever Yamaha TT500 XT500 Heavy Duty, with Rubber Tip Gear Lever Yamaha Heavy Duty with reinforced hinge, black painted steel, and grey rubber tip, with wide tooth spline system, this lever finds a firm grip on a shifter shaft with even partially worn teeth Application: XT250 TT500 XT500 XT550... MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K21016SI Gear Lever Yamaha XT250 SR250 TT500 XT500 Forged Alloy, Folding tip (3cm longer) Gear Lever Yamaha TT/XT500 Forged Alloy Folding tip (3cm longer) Application: TT500 XT500 XT550 XT600/Z (SR500 with re-worked Sprocket Cover ONLY, NOT Suitable for 1VJ, 3AJ) MSRP: Was: Now: AUD $49.95 inc. GST MSRP: Now: AUD $45.41 ex. GST Add to Cart Compare Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K30519 Handlebar 'JvB-moto Style', Aluminium Double Butted Handlebar 'JvB-moto Style', Double Butted Silver Aluminium, Mounting Diameter 28.6mm, Width 760mm, Bar Ends Diam. 22mm Application: SR500 (needs item K30521 clamp kit) : XSR700 (fits OEM... MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K30521 Handlebar Clamps, Black, 1 Pair, Double Butted Handlebars (28mm) Handlebar Clamps, Black, 1 Pair, for Double Butted Handlebars (28mm) Application: SR500 MSRP: Was: Now: AUD $149.95 inc. GST MSRP: Now: AUD $136.32 ex. GST Add to Cart Compare Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K40413 Handlebar Grip "CLASSIC" Dark-Grey, Mid-Soft Handlebar Grip, "CLASSIC" Dark-Grey, Mid-Soft, Length 125mm, (pair) MSRP: Was: Now: AUD $22.95 inc. GST MSRP: Now: AUD $20.86 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K62003 Head Light, Cover GRP JvB-moto SR400 SR500, (unpainted) This item qualifies for FREE SHIPPING within Australia and New Zealand Head Light, Cover GRP JvB-moto as used on our B-Track and 'D-Track' bike builds, (unpainted) incl. H4 Head Light and Mounting Material Application: SR400, SR500/T (Main switch has... MSRP: Was: Now: AUD $529.00 inc. GST MSRP: Now: AUD $480.91 ex. GST Add to Cart Compare Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K90139 Header Pipe, SR500 Big Bore Polished Stainless Steel Header Pipe SR500, Big Bore Polished Stainless Steel (Diameter at Junction 41mm) Shape similar to original; single-walled clean made of stainless steel and electropolished Diameter at the transition to the manifold 41 mm, thus allowing the... MSRP: Was: Now: AUD $299.95 inc. GST MSRP: Now: AUD $272.68 ex. GST Add to Cart Compare Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K41080 Horn 12V, 100db, Black Universal (Diam. 70mm) Horn 12V, 100db, Black Universal (Diam. 70mm) MSRP: Was: Now: AUD $14.95 inc. GST MSRP: Now: AUD $13.59 ex. GST Add to Cart Compare Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K50247 Ignition Switch Relocation Bracket, Aluminium, without Mounting (Assembling at Clutch Cover), suitable wiring loom see item K41305 Ignition Switch Relocation Bracket, Aluminium, (Assembling at Clutch Cover), suitable wiring loom see item K41305 Conversion kit for relocating the main switch to the clutch cover (below the carburettor) Application: SR400 SR500 MSRP: Was: Now: AUD $21.95 inc. GST MSRP: Now: AUD $19.95 ex. GST Add to Cart Compare Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view Mikuni | sku: K30117 Intake Manifold SR500 TT500 XT500 Mikuni Intake Manifold SR500 TT500 XT500 Mikuni VM/TM SR500 & XT500 Mikuni Intake Port Only useful together with VM36-38 & FS-TM Mikuni carburetor Due to the short design assembly and disassembly of the carburetor is... MSRP: Was: Now: AUD $59.95 inc. GST MSRP: Now: AUD $54.50 ex. GST Add to Cart Compare Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K62014 License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector License Plate Bracket, Aluminium, SILVER, incl. LED-Taillight + Reflector as Used on our B-Track and D-Track Project Bikes Application: SR400, SR500 (Suitable For Rear Fender Item No. K62002 or Item No. K22416) MSRP: Was: Now: AUD $149.00 inc. GST MSRP: Now: AUD $135.45 ex. GST Add to Cart Compare Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K41406 License Plate Light LED 'D-Track', e-marked, 47x20x14mm License Plate Light LED 'D-Track', e-marked, 47x20x14mm MSRP: Was: Now: AUD $22.00 inc. GST MSRP: Now: AUD $20.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view KEDO | sku: K41289 Main Switch Braket 'BritMount', stainless steel, relocfates the main switch LH below the fuel tank, incl. mounting material Main Switch Bracket 'BritMount', stainless steel, relocates the main switch LH below the fuel tank, includes mounting material Application: SR500 - '94 MSRP: Was: Now: AUD $69.95 inc. GST MSRP: Now: AUD $63.59 ex. GST Add to Cart Compare Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Quick view sku: K60607 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 Mini Skid Plate Alloy, with mounting kit SR500 TT500 XT500 as used on our B-Track and D-Track bike builds Ideal for Classic and Scrambler conversions with protection as much as necessary Casted aluminium skid-plate, mounted to stock mounting... MSRP: Was: Now: AUD $110.00 inc. GST MSRP: Now: AUD $100.00 ex. GST Add to Cart Compare Quick view
Australian Dollar
Canadian Dollar
European Euro
Japanese Yen
New Zealand Dollar
South African Rand
Thai Baht
US Dollar
