Quick view Details KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Details Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view Details sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Details Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view Details sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Details KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view Details sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Details KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view Details sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Details KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view Details sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Details KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view Details sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Details KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view Details sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Details KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view Details sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Details KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view Details sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Details sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Details KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Details KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view KEDO | sku: K30501B Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Rear Wheel Spoke Set Stainless Steel, black burnished (18"), incl. nipples Application: SR500, XT500, XT550, XT600'87-'89, XT600Z'88-'90 Spoke Sets Stainless black Black burnished, looks particularly elegant in combination with... MSRP: Was: Now: JPY14,069.69 inc. GST MSRP: Now: JPY12,790.76 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view KEDO | sku: K11083 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Repair Screw-in Bushing for Original TDC Sight Glass Item 11009, glass and gasket are taken from the original part, SR400FI, SR500, TT500, XT500 Application: SR400FI, SR500, TT500, XT500 MSRP: Was: Now: JPY1,112.92 inc. GST MSRP: Now: JPY1,011.68 ex. GST Add to Cart Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view KEDO | sku: K21091 Repair-Set for clutch lever XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 (lifter/engine, upper and lower needle bearing, oil seal) Repair-Set for clutch lever (lifter/engine, upper and lower needle bearing, oil seal) Application: XT550, SRX600, TT600/E/S/R/RE, XT600/Z/K, XT600E-'95 Clutch Push Lever Repair Set Scope of delivery: upper and lower needle bearing, shaft seal MSRP: Was: Now: JPY4,459.12 inc. GST MSRP: Now: JPY4,053.41 ex. GST Add to Cart Compare Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view KEDO | sku: K10312G Replica Alloy Rim XT600/Z 2.50x18', gold anodized, drilled ready to mount Replica Alloy Rim 2.50x18', gold anodized, drilled ready to mount Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view KEDO | sku: K10304G Replica Alloy Rim XT600/Z 1.60x21', gold anodized, drilled ready to mount Replica Alloy Rim 1.60x21', gold anodized, drilled Application: XT600 and XT600Z all MSRP: Was: Now: JPY18,536.26 inc. GST MSRP: Now: JPY16,850.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view KEDO | sku: K10294 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Replica Aluminium Rim 1.85x18', polished, drilled, OEM reference # 94418-18199 Application: XT500 MSRP: Was: Now: JPY14,814.12 inc. GST MSRP: Now: JPY13,467.45 ex. GST Add to Cart Compare Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view KEDO | sku: K27011 Replica Centering Sleeve 14mm, SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850,OEM reference # 99530-14016 Centering Sleeve 14mm, OEM reference # 99530-14016 Application: SR250, XT250, SR500, TT500, XT500, XTZ750, TDM850 MSRP: Was: Now: JPY1,034.75 inc. GST MSRP: Now: JPY940.96 ex. GST Add to Cart Compare Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view sku: K21292 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair XT500, TT500 Replica Footpegs, toothed, slim (equal to Export-type), stainless steel, 1 pair Application: XT500, TT500 THIS IS A SPECIAL ORDER ITEM - PLEASE ALLOW UP TO 21 DAYS TO RECEIVE THIS ITEM. THERE IS NO RETURN ON SPECIAL ORDER PARTS. MSRP: Was: Now: JPY14,140.41 inc. GST MSRP: Now: JPY12,854.78 ex. GST Add to Cart Compare Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected × OK
Quick view KEDO | sku: K50782 Replica Front Fender 'Competition Yellow' XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) (with original mounting holes) Replica Front Fender 'Competition Yellow' (with original mounting holes) Application: XT250, TT500'79-, XT500'80- (suitable for all TT500'79-, XT500'80-) MSRP: Was: Now: JPY6,692.41 inc. GST MSRP: Now: JPY6,084.21 ex. GST Add to Cart Compare Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected
Quick view KEDO | sku: K50068 Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Replica Front Fender 'Export', 'El Toro Orange', with venting slots (STD mounting holes for easy installation) Application: XT500-'79 (suitable for all TT500-'78, XT500-'79) MSRP: Was: Now: JPY7,436.84 inc. GST MSRP: Now: JPY6,760.90 ex. GST Add to Cart Compare Previous 63 64 65 66 67 68 69 70 71 72 73 Next Previous 63 64 65 66 67 68 69 70 71 72 73 Next Compare Selected
Australian Dollar
New Zealand Dollar
US Dollar
Canadian Dollar
Thai Baht
European Euro
Japanese Yen
British Pound
