Quick view Details Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view Details sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Details KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view Details sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Details KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view Details sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Details KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view Details sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Details sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Details KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Details KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Details KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Details KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Details KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Details KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Details KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view Rex's | sku: RR12V-1 Regulator/Rectifier 12 Volt (6-12V Conversion) XT250, XT350, XT500, 12 volt conversion, dt175, dt125, dt250, DT400 12volt Regulator/Rectifier 12 Volt (6-12V Conversion) Replacement regulator rectifier for our 12 volt conversions. Supplies both regulated AC for lights and DC for battery charging. This part is OEM quality (NOT manufactured in China) and has the right... MSRP: Was: Now: JPY7,440.56 inc. GST MSRP: Now: JPY6,763.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view KEDO | sku: K41436 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Repair Wiring Loom XT500, incl. Contact Plates for Handlebar Switch Item No. 40102 Application: XT500-'78 MSRP: Was: Now: JPY1,109.20 inc. GST MSRP: Now: JPY1,008.70 ex. GST Add to Cart Compare Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view KEDO | sku: K11150-2 Replica breaker contact plate, stainless steel base plate with Daiichi contact/condenser, ready-to-mount INCL. cable & sealing rubber Replica breaker contact plate, stainless steel base plate with contact/condenser, ready-to-mount INCL. cable & sealing rubber Application: TT500, XT500 OEM-Vergleichs-Nr. 583-81620-50 MSRP: Was: Now: JPY12,647.83 inc. GST MSRP: Now: JPY11,497.69 ex. GST Add to Cart Compare Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view KEDO | sku: K41022RP Replica Front Brake Light Switch with 52cm Cable – Compatible with XT500, SR500T (with Front Drum Brake) Replica Brake Light Switch, front, 52cm cable length, two lugs for secure fitting in the brake perch OEM reference: # 395-83980-00 # 395-83980-00-00 Application: Drum Front SR400 SR500, XT500 MSRP: Was: Now: JPY1,704.74 inc. GST MSRP: Now: JPY1,549.90 ex. GST Add to Cart Compare Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view sku: K40102 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Replica handlebar switch LH, OEM-Comparison-No.3H7-83972-00 1R6-83972-00 suitable for wiring harness 40076-18 Application: XT500-'78 XT500 Handlebar Switch Very good replica with correct circuit diagram and matching plugs, visually almost... MSRP: Was: Now: JPY5,203.55 inc. GST MSRP: Now: JPY4,730.84 ex. GST Add to Cart Compare Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view KEDO | sku: K40103 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Replica Handlebar Switch, LH, OEM reference # 1R7-83972-00 suitable for wiring harness 40078-18 Application: XT500'79-'85 XT500 Handlebar Switch Very good replica with correct circuitry, matching connectors andcable colors, visually almost... MSRP: Was: Now: JPY5,501.32 inc. GST MSRP: Now: JPY5,001.07 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view KEDO | sku: K50583U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt, XT500 Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and M5 bolt Application: XT500-'79 (horns see item 41012/41506(6V) or 41132 (12V)) MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view KEDO | sku: K50584U Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Replica Horn Bracket, stainless steel black coated, suitable for horns without rubber bearing and with M5 bolt XT500, optimized mounting position Application: XT500'80- (horns see Art. 41012/41506 (6V) or 41132 (12V)) MSRP: Was: Now: JPY2,449.17 inc. GST MSRP: Now: JPY2,226.58 ex. GST Add to Cart Compare Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view KEDO | sku: K50583 Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Replica Horn Bracket, stainless steel, black coated, suitable for horns with rubber bearing XT500 (see item 41549 (6V), 41253/41013 (12V)) Application: XT500-'79 MSRP: Was: Now: JPY2,076.95 inc. GST MSRP: Now: JPY1,887.87 ex. GST Add to Cart Compare Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view KEDO | sku: K50062 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved YAMAHA XT250, XT500, OEM reference # 449-85131-0 Replica Rear Reflector, Red, Round, 55mm Reflector/59mm overall, M5 Bolt, E-Approved, OEM reference # 449-85131-01 Application: XT250, XT500 XT250/500 Replica Reflector Bracket Black housing with rear M5 boltDiameter: reflector 55 mm, total... MSRP: Was: Now: JPY1,187.36 inc. GST MSRP: Now: JPY1,079.42 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected × OK
Quick view KEDO | sku: K41188 Replica Rectifier 6V, XT250, XT500-'85, TT600-'92 Replica Rectifier Unit Replica resp. OEM spare part, fits without any modification Application: XT250, XT500-'85, TT600-'92 MSRP: Was: Now: JPY1,853.63 inc. GST MSRP: Now: JPY1,685.38 ex. GST Add to Cart Compare Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected
Quick view KEDO | sku: K50087 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Replica Reflector Bracket, rear, black (suitable for OEM license plate reinforcement DE,DK,CH), OEM Reference # 1U6-21641-00 Application: XT250, XT500: Suitable reflector see item 50062 XT250/500 Licence Plate Re-Enforcement The... MSRP: Was: Now: JPY1,857.35 inc. GST MSRP: Now: JPY1,688.36 ex. GST Add to Cart Compare Previous 6 7 8 9 10 11 12 13 14 15 Next Previous 6 7 8 9 10 11 12 13 14 15 Next Compare Selected
Australian Dollar
New Zealand Dollar
US Dollar
Canadian Dollar
Thai Baht
European Euro
Japanese Yen
British Pound
