Quick view Details KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view Details YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view Details sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view Details sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view Details sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view Details sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view Details YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view Details sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view Details sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view Details sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view Details sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view Details KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view Details sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view Details sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view Details sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view Details sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view Details sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view Details sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view Details sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view Details sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view Details sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view Details sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view Details sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view Details sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view Details sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view Details sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view Details KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view Details KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view Details KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view Details KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view Details KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view Details KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view KEDO | sku: K28696 Accelerator Pump Diaphragm (Pin Length 12.0mm) SR500 80-89 (XT500 80-81 US) Accelerator Pump Diaphragm (Pin Length 12.0mm) OEM Reference: # 2J4-14940-00 # 2J4-14940-00-00 Application: SR500 '80-'89, XT500F '80 US model only, XT500H'81 US model... MSRP: Was: Now: AUD $39.90 inc. GST MSRP: Now: AUD $36.27 ex. GST Add to Cart Compare Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view YAMAHA | sku: Y27986 Accelerator Pump Diaphragm (Pin Length 13.4mm) SR500 -79 ( 2H0-14940-00 ) Accelerator Pump Diaphragm (Pin Length 13.4mm) OEM reference: # 2H0-14940-00 # 2H0-14940-00-00 Application: SR500 -'79, XT500F '79 US model only MSRP: Was: Now: AUD $46.50 inc. GST MSRP: Now: AUD $42.27 ex. GST Add to Cart Compare Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view KEDO | sku: K27982 Accelerator Pump Diaphragm Safety Valve(3-Point Mounting) SR500 -89 ( 2J2-14940-00 ) Diaphragm Safety Valve Accelerator Pump (3-Point Mounting) OEM # 2J2-14940-00 Application: SR500-'89 (Round Slide Carburettor) MSRP: Was: Now: AUD $34.90 inc. GST MSRP: Now: AUD $31.73 ex. GST Add to Cart Compare Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view sku: K27985 Air-Cut Valve (3-Point Mounting on the RIGHT Side) SR500 <89 ( 2H0-14217-00 ) Air-Cut Valve (3-Point Mounting on the RIGHT Side) OEM # 2H0-14217-00 Application: SR500-'89, XT500G '80 US, XT500H '81 US MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view sku: K29122-1 Air-Cut Valve Cover Cap included o-rings SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) Included with O-Ring seals items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $99.90 inc. GST MSRP: Now: AUD $90.82 ex. GST Add to Cart Compare Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view sku: K29122 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) OEM reference 3GW-14958-00-00 Air-Cut Valve Cover Cap SR500 '90-on (BST34 Flat Slide Carb) O-Ring seals if required see items K27802 and K27803 OEM reference: # 3GW-14958-00 #3GW-14958-00-00 Application: SR400 '92-2000, SR500 '90-on MSRP: Was: Now: AUD $94.90 inc. GST MSRP: Now: AUD $86.27 ex. GST Add to Cart Compare Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view sku: K41512 Air-Cut Valve Diaphragm and Gasket Set SR500 -'89 Diaphragm and Gasket Set Air-Cut Valve SR500 -'89 Application: SR500 -'89 MSRP: Was: Now: AUD $19.90 inc. GST MSRP: Now: AUD $18.09 ex. GST Add to Cart Compare Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view KEDO | sku: K28772 Air-Cut-Valve diaphragm SR500'90- (BST34 Carb), XTZ750 (BDST38 Carb), TDM850-'98, TRX850 Diaphragm Air-Cut Valve BST34 and BST38 Mikuni Carb Cuts the air inlet in gas throttling, thus ensures the enrichment of mixture and the fuel air mixture gets lightly raised enriched. This avoids the "splashing back" in the carburettor OEM... MSRP: Was: Now: AUD $49.90 inc. GST MSRP: Now: AUD $45.36 ex. GST Temporarily Out of stock Compare Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view KEDO | sku: K27061 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 Ball for Choke Lever-Locking Mechanism; Mikuni Carburettor VM32/VM34, OEM Reference# 93501-08001 Application: TT500, XT500, SR500'84-'89 MSRP: Was: Now: AUD $1.95 inc. GST MSRP: Now: AUD $1.77 ex. GST Add to Cart Compare Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view KEDO | sku: K27787 Bushing for Choke Lever VM34SS, SR500, XT500 required for mounting the lever, OEM reference #2J2-14194-00 Bushing for Choke Lever VM34SS, required for mounting the lever, OEM reference #2J2-14194-00 Application: SR500, XT500 MSRP: Was: Now: AUD $9.90 inc. GST MSRP: Now: AUD $9.00 ex. GST Add to Cart Compare Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected × OK
Quick view KEDO | sku: K29569 Cap for choke piston Mikuni VM32/34SS, SR500-89, TT500, XT500, OEM Reference # 802-14173-00 Cap for choke piston Mikuni VM32/34SS, OEM Reference # 802-14173-00 Application: TT500, XT500, SR500-'89 MSRP: Was: Now: AUD $5.90 inc. GST MSRP: Now: AUD $5.36 ex. GST Add to Cart Compare Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected
Quick view KEDO | sku: K30208 Cap for Low Pressure Terminal Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) Cap for Low Pressure Terminal Application: misc. Mikuni-Carburettors (BST34, TM34, TM36, TM40, VM34) MSRP: Was: Now: AUD $7.90 inc. GST MSRP: Now: AUD $7.18 ex. GST Add to Cart Compare 1 2 3 4 5 Next 1 2 3 4 5 Next Compare Selected
Australian Dollar
New Zealand Dollar
US Dollar
Canadian Dollar
Thai Baht
European Euro
Japanese Yen
British Pound
